LOMAX® STANCE™ HARD COVER REVIEWS
This tonneau cover has an average 
rating based on 111 customer reviews.
By Chuck S. - FL
" Fits great, easy to install. Currently experiencing a tropical storm here in Tampa, FL, so I checked the back of the truck, some seepage but what I consider minimal. Added the carpet, also easy to install. "
By Stuart B. - VT
" It does exactly as advertised. It's simple design and Installation emphasizes the thought that went into this cover. I look around at other covers that are flopping around or loose and torn and feel pretty good about my choice. Whatever you're doing - keep doing it. "
By Brian B. - OR
" Very simple and easy to install. My only complaint would be that the rail clamp bolts could be a bit longer, as I had to loosen them up substantially to get the rails on. Once that was done, tightening and torquing to spec was fine. "
By Chuck Z. - TX
" Bought the fold up cover and matching rack for my Jeep Gladiator. The two are perfectly paired for the gladiator bed. Installation was easily done with one person. It was also the best deal I found for these two products. "
By Sal C. - PA
" Very easy to install . Looks great . "
By Joshua B. - KY
" I love the look, this was the only cover I could find that didn't have rubber running down the top sides overlapping the bed rails. When I received the cover, some of the thin edge did not have the black finish. Very obvious when you walk up to the truck. Customer service states this is not a blemish, they don't directly coat the edges. Obviously other people don't like this also because they offer a paint pen to touch it up (and the rep also said some customers will not like the unpainted edges). This part is my fault. I didn't pay attention to pictures that demonstrate the folded up position. I don't like how the cover stands up. They offer magnets to go on top of your roof to support the cover in the upward position. I don't like anything on my paint. I've had magnet antennas on work truck and they will definitely damage your paint over time. Using these magnets a short time, they would probably be okay but I'm not taking the chance. I'm skeptical they would support the cover going 70 mph down an interstate. It's really easy to take the whole cover off by loosening 2 nuts so I'll do that. Also I won't need it in this position very often. Overall I am happy with it and do not regret the purchase. Very easy install and folds up easily. Clean low profile look. "
By Gary B. - CA
" By far the best bed cover I've owned. I have had other folding and retractable covers and all had issues with leaking and were hard to remove if you needed to. The low profile design is very clean. Getting ready to purchase new truck and this will be the first accessory purchased. "
By Clay D. - LA
" Pro series rac is great. Easy to install. Holds my 2 kayaks perfectly. It also allows me to keep cover on and lock my tailgate keeping paddles and other equipment secure. "
By Will H. - CA
" Installation instructions were well written. Be advised that there may be supplemental instructions for your particular make and model. Be sure to take it under advisement as specific design features in your truck bed can help or complicate your installation. I had no such issues, but want to encourage others to take it under consideration when self installing. "
By Andres V. - MD
" A long overdue review for exceptional durability and functionality - 6 years later and counting. I installed the LOMAX Folding Hard Tonneau Cover and the ADARAC Aluminum Pro Series Rack in my truck back in September 2018, and after nearly six years of use, I felt it's high time to share my experience. Simply put, this setup has exceeded my expectations in every way, and it has proven to be a wise and durable investment. The most impressive aspect of this setup is its durability. After six years, it still looks and functions like it did on day one. The Cover has held up exceptionally well, with no signs of wear and tear. The aluminum construction of the Rack is also remarkably resilient, showing no signs of rust or corrosion despite exposure to the elements (my truck has never been garaged). The functionality of this combination is outstanding. The Hard Tonneau Cover provides a secure and waterproof seal for my truck bed, keeping my cargo dry and protected from the elements. It's incredibly easy to use, and the folding design allows me to access the bed quickly when needed. The rack has been a game-changer. It provides a convenient and sturdy platform for carrying items like ladders and other equipment. The ease of installation and versatility of this rack are highly commendable. This investment has paid dividends over the years. Not only has it preserved the integrity of my tools in the truck bed, but it has also made my life easier by allowing me to transport cargo securely. I've had the pleasure of knowing that my gear is protected from the weather and easily accessible when I need it. This setup has proven its worth many times over. If you're considering outfitting your truck with this setup, don't hesitate. I can confidently say that this combination is worth every penny. , and my next truck will undoubtedly receive a similar treatment. "
By Sang N. - TX
" Great bed cover! installation was very easy and straight forward, Youtube has videos on how you can install it, but make sure you follow the paper instruction for clamping the rail. Different truck bed has different style deck rail system (or no deck rail). I had a good amount of rain and the cover did not have any leaks. I saw only a few droplets on the side of the bed by the tailgate. Not losing bed space is great! I am very happy with this bed cover. "
By Tom L. - TN
" Perfect compliment to my 2023 F-250 SuperDuty TREMOR! "
By Roberto Z. - CA
" So far, I can say that the installation was quick and I feel very satisfied with the purchase. I fully fill my expectations "
By Don H. - IA
" The installation was easy and the cover looks great. I really like how it opens to allow full access to the bed. "
By Eric L. - TN
" The Lomax Stance is standing tall with my friends who have been asking where I got this cool looking cover for my Honda Ridgeline. The install went great by just following the instructions. The Lomax Stance was installed with no added assistance and functions perfectly. In short; the best bed cover (no leaks), quite going down the road, easy to flip, the latch is very secure, and really enhances the look on my Honda Ridgeline. I will buy the Lomax Stance for my next truck regardless of the brand of vehicle I decide to go with. I wish I knew about this product for my Ford F-250 which I used to pull our RV. Lomax is just a great well thought out product. Eric "
By Mark B. - ND
" Stance cover traveled great upright 250 miles to pick up a new used hog. Looks great when it is closed and opening is faster than rolling with added security! "
By Neil L. - TX
" I received my Lomax Stance hardcover as promised. The installation was more difficult than I expected it to be. The clamps that hold the rails in place weren't particularly easy to install, but I learned as I went and got it done. I have not installed the brace mounts on the roof of my truck yet because I have a problem with the idea of gluing something to the painted surface of my new truck. I can see how it would work with the cover in the vertical position, and that they are necessary in holding it in place. I might eventually do this I don't know. As for the cover itself I reallv love the look and functionality of it. The low profile and urethane finish are a good combination and it really dresses up my truck. This cover is so much easier to operate than the one I had on my other truck. I think the Lomax is a very good product and I definitely recommend it. "
By Jake E. - MO
" I've had many different brands and style of Tonneau covers over the years from roll and lock, to a few Backflip models, and now this Lomax that I combined with the Ada rac pro aluminum series and I couldn't be happier. Everything fits like a glove. Installation was super easy and the 2 products work flawlessly when used together. The lomax cover is light yet sturdy and seems to keep my bed completely water tight besides the occasional car wash/power wash that gets through the cracks in the tailgate. Again, couldn't be happier especially for the proce! Thanks for great products!! "
By Kendal K. - NM
" Purchases for a 2020 GMC Sierra 1500 a couple of weeks ago and used extensively (opening and closing) over the past week. So far, I am very pleased. I like that I have full access to the bed when needed by standing up cover behind back window. It does leak a little bit of water at the front but not a problem for most of the cargo I normally carry. It fits bed perfectly and looks good. Installation took about 1 hour total. I would recommend. "
By George - RI
" So far, so good although I've only had it for a few weeks and haven't driven with it completely folded up. It's sturdy and operates as described. Installation was reasonable but getting the rails flush is critical. I didn't like that the allen bolts on the stabilizer arms were stripped and couldn't be turned. No allen wrench I owned would fit them. I had to jerry-rig loosening and tightening those with pliers. I was told the arms were set to my truck from the factory and shouldn't need adjusting. Not so. They definitely needed to be adjusted inward. It looks great on my truck and I'm generally happy with it, but I think the warranty period should be longer than 3 years. "
By Luke H. - NH
" Great product. Truck bed stays dry, folds and operates as advertised. Easy to install, no hiccups. Highly recommend. "
By Tasveer S. - CA
" I purchased this cover for my 2022 Ford Maverick. The shipment was prompt. It was very well packaged. It took me a half hour to install by myself. Installation was very simple. The instructions were very clear. I've used other brands before, but the quality of this cover is superior to other brands. A lot of thought was put into designing this cover. It also looks cleaner than other hard covers when in the fully closed position. "
By S. M. - PA
" I have been looking for a hard cover for my 2021 Tundra for a while. I have researched most of them and watched many social media reviews. I decided to go with the Stance and I am happy I did. It looks awesome and is easy to use. I went with the diamond mist and it looks sharp. Installation was pretty straightforward and you will have to make some adjustments (alignment). I went from unboxing to installed in about 90 minutes. I am very happy with the ease of operation to access the bed and make room for items that are too talll. I haven't installed the roof mounts yet due to the temps here in Pa, but do not see it being a problem. Shipping was seamless and product was in great shape. I did wipe down the panels with alcohol due to shipping/ manufacturing dust, but I would have done that regardless. I think it really enhances the look of the truck and the low profile is for real. Great product! "
By Dillon D. - LA
" Overall it is a great cover. The bed liner coating that is sprayed on could be better for the price of the cover. The edges of my cover were not sprayed so you can still see bare aluminum on the edges. I have a 2023 tundra with deck rail system and the allows a little flex in the mounting rail at the edge of the tail gate so i have to pull the latch when closing to get the cover to re latch. I cannot just close the cover and let it latch on its own because it will just flex the mounting rail. I do no think this is the cover fault. I think think if i didn't have the deck rail system this problem would not exist. Water tight even when spraying a pressure washer around the edges. "
By Dan M. - CA
" Easy install and perfect fit on 2015 F-150. Replaced a cover that did not hold up. Really like the low profile and tough exterior. Also like the ability to close tailtgate without lifting the cover. We've had our first hard windy rain for the season and their were no leaks! Atttention to security is appreciated. The latch cord is positioned very close to tailgate so it is well protected from attempt to snag with wire. "
By Tyler T. - UT
" Love the product and the customer service was great. Curt took care of me! I do wish the lomax stance could be removed easier, like the regular lomax. "
By Paul J. - ON
" I recently installed a Lomax Stance hard cover on my 2022 Honda Ridgeline. I am very impressed with cover's design, the quality materials used, it's robust construction, and thoughtful features. This is a top notch hard cover, designed to last. It was not difficult to install, and it included some additional instructions to ensure a good fit with the Ridgeline's unique bed characteristics. The low profile design and textured black urethane finish look great on my truck. I had a couple of questions, and found Agricover's support responsive and great to work with. Overall I am very pleased I bought this cover and went with this brand. "
By Kevin M. - RI
" After doing lots of research for a folding hard cover for my 2021 Ram Rebel, I've chosen the Lomax Stance. There's been a few times I had to take my old tri- fold hard cover all the way off to fit certain things in my old Nissan Titan's bed. The new Stance cover on my Ram Rebel opens up the whole bed if I need it to and folds to a typical 3 way fold when I don't. And when it's completely closed, it looks great with its low profile. The whole thing is made very well with quality components. Installation was super easy for a regular guy too. Customer service was excellent and fast when I had a question. Very happy with my purchase. "
By David J. - AZ
" Very satisfied...... Easy to install...... "
By Ray R. - MO
" Bought the STANCE for my surveying work truck. Two things I was concerned about - Access to my equipment and water leakage. I have used it for three weeks and I am very pleased. It has went through some hard rain and had just a small spot of wetness at the tailgate. For most work, I can just flip back the two rear cover flaps. When I do need to access the front, it is no problem to fully expose the entire bed. I am totally satisfied so far with the STANCE cover. Also, the staff that I spoke to were very friendly and informative. Thanks for a great product! "
By Kevin W. - NE
" Works great! When we travel or shop our things are securely in the back. Kayak racks fit perfect on top the rack & so do project supplies. Easy to take the cover off when you need to haul something larger. All around handy for work or play. "
By Daniel R. - NC
" Purchased the Lomax Stance Hard cover Jan 2021. It is a high quality cover. It keeps water out, looks great and customer support is always available to answer your questions. "
By Michael H. - PA
" Installation was easy for LOMAX and ADARAC. love te cover. The ADARAC rack was taller then I was told. Rack on will not fit in the garage. "
By Charles G. - TX
" Finished product look awesome on my 2020 Ram. Cover install was easy and strait forward. Very minor leakage between tailgate and cover that I can probably adjust out. Rack install a little more involved on the RAM. The stake pockets on RAM are not centered in the front, the plate had to be modified (cut +/- 1/2 off one long side) to get it to grab and be secured. I have the rails installed, but only use rack occasionally so not installed until needed. Great kit! "
By Ryan S. - ND
" I put a new LOMAX STANCE Cover on my truck and finally got to test it out by hauling a big item. This cover can open vertically if necessary and I was about a half inch away from having to do that! Made me feel a lot more confident knowing I could pick up large stuff on short notice and not have to find a way to get it home. I drove with the cover open for about 4 hours and it was smooth sailing. I love the urethane finish and can't wait to see what else this cover will do. "
