ROCKSTAR™ HITCH MOUNTED MUD FLAPS REVIEWS
These mud flaps has an average 
rating based on 106 customer reviews.
By LOREN M. - SD
" THESE THE BEST I HAVE EVER USED . THEY KEEP ROCKS AND DEBRIS FROM CHIPPING MY BOAT WHEN BEING TOWED. I HAD A SET ON MY OTHER TRUCK AND SO I HAD TO GET ANOTHER ST. "
By James B. - FL
" I like the flaps so far. You Really need to change the installation instructions. I cant remember now but it was something that said to do this and then further down in the instruction it said if you have this flap do this, so I had to take it apart and start over. "
By Oscar M. - WI
" No issues with installation. The flap frame works hides the ball hitch from the camera. "
By Luke S. - WI
" I am giving my review five stars but with a warning to other customers. DO NOT use an impact to tighten the hitch clamp system. I have just a cheaper Ryobi impact and it ruined the threads on a couple of them. So to resolve I have to buy a cutoff tool and grind them off. I tried so hard to remove the stripped ones that the carriage bolts (with the square inside) spun in the aluminum channel and wrecked that as well. So I will have to replace with plain hex bolts that go on the outside of the channel. I've never had this impact ruin hardware before... so I'm not sure what that was all about. The only knock on the product itself is that I wish they'd smooth the edges of the aluminum a little bit. They are so sharp that I have to put gloves on to handle it. I got mine the standard length for a 2016 RAM 1500 and I had to trim about 1.5" off. On perfectly flat ground they were almost touching but with any undulation of the ground they'd drag way too hard. Overall, a very well made product. Very heavy duty. I expect it to last the life of my truck. "
By Luke K. - MN
" Very happy with my purchase of Rockstar XL hitch mounted mudflap. Very easy to assemble and adjust. Mudflaps give great protection when towing my Glacier ice house. Recommend this product! "
By Jon S. - CA
" FedEx lost the shipment and I still have not received them. I have re-ordered them again and hope to receive them soon. "
By Owen F. - ND
" Fit and finish are great. Mounting system is great. The assembly instructions do not mention the exhaust shields that come with the GMC dual exhaust version. Some trial and error was required to get them and the mud flap braces in the right place. The braces also partially cover the exhaust outlets when installed. "
By Shana M. - UT
" When we ordered the Rockstar mud flaps we requested the package for the 2021 Ford F-350. The new Super Duty Ford comes with a 2.5 - 3.0 inch shank. Our kit came with. 2.0 in shank. I called and they sent me out the right size and I had it in two days. I love these they look good on the truck and do a great job with keeping the rocks away from our trailer. "
By Chris W. - OH
" Very easy to install and works perfect! It also looks really nice as well! I have a B&W Tow and Stow hitch and it is a very tight fit to get the hitch pin in the receiver but I was able to make it work. Shorter outside tabs would have made it easier. "
By William W. - NM
" I recently purchased your Rockstar 3XL and the 2-1/2" mounting clamp for my Chevy dually. I love how it looks and can't wait to see how it works keeping my trailer safe. I am sure it will work perfectly. I was very happy with how easy it was to assemble and mount. The only thing I have an issue with is how the clamp had to be mounted to the face of the frame, since the receiver on my truck sticks out to far for the bumper stabilizers to contact the bumper with the clamp mounted on the back of the frame. I know you are aware of the issue, since the instructions indicate this might be a problem, and to mount the clamp to the face of the frame if this happens. My only concern with this setup is the nuts holding the clamp to the frame are very visible and easily accessible. Maybe I am being a bit paranoid, but I believe this might give some people an incentive to attempt to remove the flaps from my truck. I have a suggestion that you might, or might not, want to consider. Why not make the bumper stabilizers adjustable? It wouldn't be difficult to accomplish, and would make it possible to use the clamp as intended. It would also greatly improve the looks of the entire mudflap. I realize that this will add a bit to the cost of these things but, it should be a minimal increase, if any at all. "
